Описание
Anthem D2v 3D
The D2v 3D pushes the boundaries on what you expect from music and home theater performance. With the unparalleled flexibility you have to come to expect from Anthem processors, it provides both the versatility and adjustability you need to ale all of your digital video components work together seamlessly. The results are spectacular.
From riding the third dimension on light cycles in the movie Tron, to racing through the 3D jungles of Pandora in Avatar, the movie experience is always better in triple dimensions. 3D video has a different structure than traditional video so it must pass through the A/V processor without being affected. The new Anthem AVM 50v circuit board automatically detects the presence of 3D video and go into passthrough mode as per a source menu option for video output configuration, passing the 3D HDMI signal from a 3D Blu-ray player to a 3D TV at resolutions up to 1080p. For additional convenience, in passthrough mode the output refresh rate is now automatically matched to the source’s frame refresh rate which is useful for sources that output a mix between 24, 50 and 60 Hz.
It’s now 3D equipped. Fully featured 7.1-channel audio and video processor, 8 HDMI Inputs and 2 Parallel HDMI outputs with the top four ports (HDMI 1 through 4) and top output (HDMI 1) supporting true bypass sensing 3D inputs automatically, Dolby TrueHD, DTS-HD Master Audio, PCM 24/192, highest quality 1080p upscaling with 1080p24 compatibility, Anthem Room Correction, premium quality A/D and D/A converters, 24-bit/192 kHz upsampling on all channels in main zone, two stereo zones.
VIDEO SWITCHING | ||
Bandwidth from input to output jack (bypass mode for component video) | ||
Composite and S-Video | 70 MHz | |
Component | Y | 110 MHz |
Pr | 90 MHz | |
Pb | 80 MHz | |
All analog video inputs and outputs are 75 Ω, 1.5 Vp-p. | ||
ANALOG AUDIO | ||
Input Impedance | 20 kΩ | |
Output Impedance | Main-RCA | 300 Ω |
XLR | 600 Ω | |
Zones 2/3 and Record | 51 Ω | |
Rated Input | 2.0 Vrms | |
Maximum Input | 5.3 Vrms | |
Minimum Load | 5 kΩ | |
Rated Output (100 kΩ load) | 2.0 Vrms | |
Maximum Output | RCA | 6.3 Vrms |
XLR | 12.6 Vrms | |
Headphone Output | 100 mW into 32 Ω at 0.2% THD+N | |
Volume Control Range | Main | – 95.5 dB to +31.5 dB (in 0.5 dB increments) |
Zone 2/3 and Headphone | – 62.5 dB to +10.0 dB (in 1.25 dB increments) | |
Crosstalk (at 1 kHz) | 82 dB between channels; 86 dB between inputs | |
XLR Pin Configuration | Pin 1: Ground, Pin 2: Positive, Pin 3: Negative | |
DIGITAL AUDIO | ||
Crossover | High-Pass Slope (small speaker setting) | 12 dB/octave (2nd order) |
Low-Pass Slope (subwoofer) | 24 dB/octave (4th order) | |
Frequency (adjustable) | 25 Hz to 160 Hz (in 5 Hz increments) | |
Tone Control | Fliter Type | Shelf |
Range | +/- 12 dB | |
Bass Turnover Frequency | 200 Hz | |
Treble Turnover Frequency | 2 kHz | |
Analog-to-Digital Conversion S/N Ratio (at digital Rec output) (IEC-A Filter) | 100 dB | |
All digital audio inputs and outputs comply with HDMI, S/PDIF or AES/EBU standards. Sample rate converter output is 24 bit/192 kHz regardless of input. | ||
MAIN PATH (RCA and XLR Outputs) | ||
Frequency Response and Bandwidth | Analog Direct Inputs | 10 Hz to 20 kHz (+0 -0.2 dB), 1 Hz to 130 kHz (+0 -3 dB) |
Analog-DSP Inputs at 24/96 | 10 Hz to 20 kHz (+0 -0.3 dB), 2 Hz to 44.1 kHz (+0 -3 dB) | |
Digital Inputs at 24/96 | 10 Hz to 20 kHz (+0 -0.2 dB), 1 Hz to 45 kHz (+0 -3 dB) | |
THD+N (at Rated Input and Output) | Analog Direct Inputs | 0.006% (80 kHz BW) |
Analog-DSP Inputs at 24/48 or 24/96 | 0.004% (AES17 Filter) | |
Digital Inputs at 24/48 or 24/96 | 0.004% (AES17 Filter) | |
IMD (CCIF at 15 kHz and 16 kHz) | Analog Direct Inputs | <0.001% |
Analog-DSP Inputs at 24/48 | 0.001% | |
Digital Inputs at 24/48 or 24/96 | 0.001% | |
S/N Ratio (ref. 2.0 Vrms, IEC-A Filter) | Analog Direct Inputs | 107 dB |
Analog-DSP Inputs at 24/48 or 24/96 | 101 dB | |
Digital Inputs at 24/48 or 24/96 | 104 dB | |
ZONE 2 and ZONE 3 PATHS | ||
Frequency Response and Bandwidth | 20 Hz to 20 kHz (+0 -0.1 dB), 3 Hz to 140 kHz (+0 -3 dB) | |
THD+N (at Rated Input and Output) | 0.06% (80 kHz BW) | |
IMD (CCIF at 15 kHz and 16 kHz) | 0.06% | |
S/N Ratio (ref. 2.0 Vrms, IEC-A Filter) | 97 dB | |
FM TUNER | ||
Sensitivity | 50 dB S/N | 13 dBµ typical, 25 dBµ max. |
IHF | 10 dBµ typical, 20 dBµ max. | |
S/N Ratio | Mono | 75 dB typical, 65 dB min. |
Stereo | 69 dB typical, 60 dB min. | |
Distortion | Mono | 0.2% typical, 1.0% max. |
Stereo | 0.3% typical, 1.5% max. | |
Stereo Separation | 40 dB typical, 25 dB min. | |
Alternate Channel Selectivity (+/- 400 kHz) | 70 dB typical, 60 dB min. | |
Frequency Response | 25 Hz to 15 kHz (+0 -2 dB) | |
AM TUNER | ||
Sensitivity (20 dB S/N) | 49 dBµ typical, 56 dBµ max. | |
S/N Ratio | 50 dB typical, 43 dB min. | |
Distortion | 0.7% typical, 2.0% max. | |
One-Signal Selectivity (+/- 10 kHz) | 24 dB typical, 18 dB min. | |
CONTROL | ||
Infra Red | Carrier Frequency | 38 kHz |
Maximum 12 V Supply Current | 150 mA | |
Maximum Emitter Current | 60 mA per output | |
RS-232 Interface | Connection | DB-9F, straight-wired |
Pinout (D2v side) | Pin 2: Tx, Pin 3: Rx, Pin 5: Ground | |
Baud Rate | 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 | |
Configuration | 8 data bits, 1 stop bit, no parity bits, flow control (RTS/CTS, none) | |
Trigger Outputs | Polarity | tip positive, sleeve ground |
Maximum Current at 12 VDC | 300 mA between all three triggers | |
Sequential Delay | 250 ms | |
POWER REQUIREMENT | ||
Consumption | Maximum 170 W | |
DIMENSIONS | ||
Height | 5-7/8 inches (14.9 cm) including feet; rack-mounting: 3 rack units without feet |
|
Width | Standard version | 19-1/4 inches (49 cm) |
Rack-Mount version | 19 inches (48.3 cm) | |
No-Handle version | 17-1/4 inches (43.8 cm) | |
Depth | 15-1/4 inches (38.7 cm) | |
Weight (unpacked) | 27 lb (12.3 kg) |